IBM Books

AIS V3.3 Protocol Config Ref Vol 1


Index

Numerics
A B C D E F G H I J L M N O P Q R S T U V W
Numerics
  • 8209 bridges (2501)
  • A
  • access control rule parameters (2784)
  • addresses (2787)
  • ICMP message type and code (2794)
  • IP protocol number (2788)
  • next hop gateway address selection (2799)
  • packet filter name (2806)
  • precedence and TOS filtering support (2796)
  • security logging options (2804)
  • source address verification (2808)
  • SysLog facility option (2802)
  • TCP connection establishment (SYN) filtering (2792)
  • TCP/UDP source and destination port numbers (2790)
  • type (2785)
  • access controls
  • IP filtering (2779)
  • IP monitoring command (2872)
  • IPX monitoring command (3361)
  • activate
  • RSVP monitoring command (3141)
  • Adaptive Source Routing Transparent bridge (ASRT) (2332), (2483)
  • basic configuration procedures (2523)
  • bit ordering in STB and SRB bridges (2479)
  • bridge-only management (2489)
  • bridging basics (2308)
  • bridging tunnel (2485)
  • encapsulation and OSPF (2487)
  • configuration matrix (2481)
  • configuring (2480), (2521), (2524)
  • description of (2440)
  • eliminating packet size problems (2477)
  • Ethernet packet format translation (2350)
  • hardware address filtering (2478)
  • MIB support (2491)
  • multiaccess bridge port
  • configuring (2512)
  • description (2508)
  • interoperation with 2218 (2515)
  • multiaccess database (2510)
  • overview (2313)
  • complex bridges (2318)
  • CSMA/CD MAC frames (2328)
  • local bridges (2319)
  • MAC bridge frame formats (2310), (2326)
  • operation and protocol architecture (2322)
  • point-to-point links (2324)
  • remote bridges (2320)
  • simple bridge (2317), (2323)
  • token-ring MAC frames (2330)
  • protocol filtering (2314)
  • source routing bridge (SRB) (2396)
  • operation (2399)
  • source routing frames (2401)
  • spanning tree explore option (2405)
  • spanning tree bridges (2349)
  • spanning tree explore option
  • balancing traffic loads (2410)
  • simulating a network (2408)
  • SR-TB bridging (2445)
  • SR-TB Conversion
  • SR-TB conversion
  • description of (2441)
  • general description (2442)
  • operation (2443), (2444)
  • SRB terminology and concepts
  • bridge instance (2413)
  • bridge number (2415)
  • explorer frames (2417)
  • interface number (2419)
  • overview (2412)
  • route (2421)
  • route discovery (2423)
  • segment number (2425)
  • source routing (2427)
  • TCP/IP host services (2490)
  • terminology and concepts (2354), (2446)
  • aging time (2356)
  • all routes broadcast (2448)
  • all stations broadcast (2450)
  • bridge (2358), (2452)
  • bridge address (2360)
  • bridge hello time (2362)
  • bridge identifier (2364)
  • bridge maximum age (2366)
  • bridge number (2454)
  • bridge priority (2368)
  • designated port (2372)
  • destination bridge (2370)
  • explorer frames (2456)
  • filtering and permanent databases (2374)
  • parallel bridges (2376)
  • path cost (2378)
  • port (2380)
  • port ID (2382)
  • port number (2384)
  • port priority (2386)
  • resolution (2388)
  • ring number (2458)
  • root bridge (2390)
  • root port (2392)
  • route (2460)
  • route designator (2462)
  • route discovery (2464)
  • segment number (2466)
  • single route broadcasting (2468)
  • source routing bridging (2470)
  • spanning tree (2394), (2472)
  • transparent bridging (2474)
  • transparent bridge (STB)
  • network requirements (2339)
  • operation of (2342)
  • overview (2334)
  • routers and transparent bridges (2336)
  • shaping the spanning tree (2347)
  • transparent-source routing compatibility (2476)
  • add
  • ASRT bridge configuration command (2540)
  • ASRT bridge monitoring command (2606)
  • BAN configuration command (2580)
  • DLSw configuration command (3212)
  • DVMRP configuration command (3094)
  • IP configuration command (2843)
  • IP route filter policy configuration command (2866)
  • IPX configuration command (3311)
  • OSPF configuration command (2952)
  • RSVP configuration command (3133)
  • SNMP configuration command (3158)
  • SNMP monitoring command (3173)
  • TCP/IP host services configuration command (2732)
  • Tunnel configuration command (2591)
  • add entry
  • ARP configuration commands (3260)
  • address entries
  • dynamic (2566), (2614), (2626)
  • free (2567), (2615)
  • permanent (2564), (2612), (2624)
  • registered (2563), (2611), (2623)
  • reserved (2562)
  • static (2565)
  • advertisement Expansion
  • OSPF monitoring command (2970)
  • AppleTalk
  • split-horizon routing (3305)
  • APPN
  • interface support (3195)
  • area summary
  • OSPF monitoring command (2972)
  • ARP
  • configuring (3254)
  • displaying statistics (3299)
  • monitoring (3283)
  • translation cache (3248)
  • with AppleTalk threading (2507)
  • with IP threading (2504)
  • ARP configuration commands
  • add entry (3261)
  • change entry (3263)
  • delete entry (3265)
  • disable auto-refresh (3267)
  • enable auto-refresh (3271)
  • list (3273)
  • set (3276)
  • summary of (3258)
  • ARP monitoring commands
  • accessing (3280)
  • clear (3284)
  • dump (3288)
  • hardware (3291)
  • protocols (3294)
  • statistics (3297)
  • summary of (3282)
  • AS boundary routing, OSPF (2932)
  • AS-external advertisements
  • OSPF monitoring command (2974)
  • ASRT
  • See Adaptive Source Routing Transparent bridge (2309), (2333), (2484)
  • ASRT bridge configuration commands
  • add (2539)
  • and IP tunnel (2575)
  • ASRT Bridge configuration command (2571)
  • ban (2547)
  • BAN commands (2577)
  • BAN configuration commands
  • add (2579)
  • delete (2582)
  • list (2585)
  • change (2549)
  • delete (2551)
  • disable (2555)
  • duplicate MAC addresses (2542)
  • enable (2557)
  • functional address to group address mapping (2543)
  • IP tunnel commands (2588)
  • list (2559)
  • NetBIOS filtering commands
  • summary (2672)
  • NetBIOS filtering concepts (2493)
  • NetBIOS filtering configuration commands
  • create (2674)
  • delete (2677)
  • disable (2680)
  • enable (2683)
  • filter-on (2686)
  • list (2689)
  • update (2692)
  • port maps explained (2541)
  • set (2570)
  • summary of (2526)
  • tunnel (2573)
  • tunnel configuration commands
  • add (2590)
  • delete (2593)
  • join (2596)
  • list (2599)
  • ASRT bridge monitoring commands
  • add (2605)
  • ban (2607)
  • BAN monitoring commands
  • discussion (2631)
  • list (2633)
  • cache (2609)
  • delete (2617)
  • flip (2619)
  • list (2621)
  • NetBIOS (2627)
  • NetBIOS filtering monitoring commands
  • list (2697)
  • summary (2695)
  • ASRT bridge NetBIOS feature
  • prompt (2532), (2602)
  • ASRT bridge NetBIOS-filtering feature
  • prompt (2534), (2604)
  • ASRT bridge tunnel feature
  • prompt (2530)
  • ASRT configuration commands
  • list
  • filtering (2561)
  • netbios (2569)
  • assigning IP addresses to bridge network interfaces (2761)
  • attach
  • IPX filter configuration command (3329)
  • auto-refresh
  • disabling (3268)
  • enabling (3269)
  • B
  • balancing SNA and NetBIOS traffic (3197)
  • BAN
  • ASRT bridge configuration command (2548)
  • ASRT bridge monitoring command (2608)
  • DLSw (3214), (3241)
  • opening service access points (2520)
  • BAN configuration commands
  • add (2578)
  • delete (2581)
  • list (2584)
  • summary (2576)
  • BAN monitoring Commands
  • BAN monitoring commands
  • accessing (2629)
  • discussion (2630)
  • list (2632)
  • BGP
  • configuring (3012)
  • connections between autonomous systems (3010)
  • default originate policy (3020)
  • defining neighbors (3014)
  • defining policies (3016)
  • enabling (3013)
  • excluding routes (3021)
  • how BGP works (3008)
  • including routes (3019)
  • internal and external neighbors (3015)
  • messages (3011)
  • overview (3007)
  • policy types (3017)
  • receive policy (3022)
  • routes
  • advertising all (3026)
  • blocking specific (3024)
  • importing all (3023)
  • sample policy definitions (3018)
  • send policy (3025)
  • TCP connections (3009)
  • BGP configuration commands (3028), (3034), (3039), (3047), (3052) , (3057)
  • add
  • aggregate (3029)
  • neighbor (3030)
  • no-receive (3031)
  • receive (3032)
  • send (3033)
  • change
  • change originate (3035)
  • change receive (3037)
  • change send (3038)
  • delete
  • aggregate (3040)
  • neighbor (3041)
  • no (3042)
  • originate (3043)
  • receive (3045)
  • send (3046)
  • disable
  • bgp speaker (3048)
  • classless-bgp (3049), (3050)
  • neighbor (3051)
  • enable
  • bgp speaker (3053)
  • classless-bgp (3054)
  • compare-med-from-diff-AS (3055)
  • neighbor (3056)
  • list
  • aggregate (3058)
  • all (3059)
  • bgp speaker (3060)
  • neighbor (3061)
  • no (3062)
  • originate (3063)
  • receive (3065)
  • send (3066)
  • move (3067)
  • policy-to-neighbor (3036), (3044), (3064)
  • set (3068)
  • update (3069)
  • BGP monitoring commands
  • destinations (3071)
  • advertised (3072)
  • received (3073)
  • disable neighbor (3074)
  • dump routing tables (3075)
  • enable neighbor (3078)
  • neighbors (3079)
  • parameter (3080)
  • paths (3081)
  • ping (3082)
  • policy-list (3084)
  • reset neighbor (3086)
  • sizes (3087)
  • traceroute (3088)
  • BOOTP
  • enabling/disabling (2818)
  • server (2821)
  • Bootstrap monitor
  • forwarding process (2816)
  • Bootstrap protocol (2815)
  • Boundary Access Node (BAN)
  • configuring (2518)
  • using (2517)
  • boundary routing, OSPF (2934)
  • bridge
  • MAC frame formats (2311), (2327)
  • point-to-point links (2325)
  • bridge and router (2338)
  • bridge network interface (2763)
  • bridges
  • basic operation (2321)
  • overview (2312)
  • types (2316)
  • versus routers (2315)
  • bridging features (2482)
  • bridging tunnel
  • description of (2486)
  • encapsulation and OSPF (2488)
  • C
  • cache
  • ASRT bridge monitoring command (2610)
  • IP monitoring command (2874)
  • IPX monitoring command (3363)
  • TCP/IP host services monitoring command (2749)
  • change
  • ASRT bridge configuration command (2550)
  • DVMRP configuration command (3096)
  • IP configuration command (2845)
  • change entry
  • ARP configuration command (3262)
  • CIP
  • configuring (3252)
  • CIP configuration commands
  • accessing (3255)
  • clear
  • ARP monitoring commands (3285)
  • IPX circuit-based filter command (3395), (3397)
  • close SAP
  • DLSw configuration command (3216)
  • command summary
  • BGP (3027), (3070)
  • LNM (2705)
  • configuration commands
  • DLSw (2644)
  • LNM (2706)
  • NetBIOS (2645)
  • configuration environment
  • accessing (2649)
  • configuration parameters
  • setting for ARP (3277)
  • configuring
  • Gateway, redundant IP (2833)
  • multiaccess bridge port (2514)
  • redundant IP Gateway (2832)
  • configuring IPX (3306)
  • configuring Virtual Router Redundancy Protocol (2830)
  • counters
  • IP monitoring command (2876)
  • IPX monitoring command (3365)
  • create (2675)
  • IPX filter configuration command (3331)
  • D
  • database
  • permanent (2613), (2625)
  • database summary
  • OSPF monitoring command (2976)
  • default
  • IPX filter configuration command (3333)
  • delete
  • ASRT bridge configuration command (2552)
  • ASRT bridge monitoring command (2618)
  • BAN configuration command (2583)
  • DLSw configuration command (3218)
  • DVMRP configuration command (3098)
  • IP configuration command (2847)
  • IPX configuration command (3313), (3367)
  • IPX filter configuration command (3335)
  • NetBIOS filtering configuration command (2678)
  • OSPF configuration command (2954)
  • RSVP configuration command (3135)
  • SNMP configuration command (3160)
  • SNMP monitoring command (3175)
  • TCP/IP host services configuration command (2734)
  • Tunnel configuration command (2594)
  • delete entry
  • ARP configuration command (3264)
  • demand circuit (2941)
  • detach
  • IPX filter configuration command (3337)
  • disable
  • ASRT bridge configuration command (2556)
  • DLSw configuration command (3220)
  • DVMRP configuration command (3100)
  • IP configuration command (2849)
  • IPX circuit-based filter command (3399)
  • IPX configuration command (3315), (3369)
  • IPX filter configuration command (3339)
  • LNM configuration command (2710)
  • NetBIOS filtering configuration command (2681)
  • OSPF configuration command (2956)
  • RSVP configuration command (3136)
  • SNMP configuration command (3162), (3164)
  • SNMP monitoring command (3177), (3179)
  • TCP/IP host services configuration command (2736)
  • disable auto-refresh
  • ARP configuration command (3266)
  • DLSw
  • configuration environment (2650)
  • configuration procedure (3208)
  • configuration requirements (3200)
  • configuring (3207)
  • configuring ASRT for DLSw (3201)
  • configuring IP for DLSw (3202), (3203)
  • configuring NetBIOS for (2652)
  • configuring the SDLC interface (3204)
  • interoperability considerations (3405)
  • interoperability with IBM 6611
  • bridge configuration (3404)
  • IP configuration considerations (3406)
  • monitoring (3237)
  • multicast addresses (3225)
  • overview (3188)
  • TCP interoperability considerations (3407)
  • using (3186)
  • X.25 requirement for QLLC (3205)
  • DLSw configuration commands
  • add (3211)
  • BAN (3213)
  • close SAP (3215)
  • delete (3217)
  • disable (3219)
  • enable (3221)
  • join group (3223)
  • leave group (3226)
  • list (3228)
  • priority (3230)
  • netbios (3231), (3245)
  • open SAP (3233)
  • set (3235)
  • summary of (3209)
  • DLSw monitoring commands
  • add (3240)
  • list
  • dls sessions nb (3242)
  • tcp capabilities (3243)
  • tcp statistics (3244)
  • netbios (3232), (3246)
  • set
  • priority (3247)
  • summary of (3238)
  • dump
  • ARP monitoring commands (3289)
  • IPX monitoring command (3371)
  • TCP/IP host services monitoring command (2747)
  • dump routing tables
  • BGP monitoring command (3076)
  • DVMRP monitoring command (3107)
  • IP monitoring command (2878)
  • OSPF monitoring command (2978)
  • DVMRP
  • monitoring (3090)
  • DVMRP configuration commands
  • add (3093)
  • change (3095)
  • delete (3097)
  • disable (3099)
  • enable (3101)
  • list (3103)
  • summary of (3092)
  • DVMRP monitoring commands
  • dump routing tables (3106)
  • interface summary (3108)
  • join (3110)
  • leave (3112)
  • mcache (3114)
  • mgroups (3116)
  • summary of (3105)
  • Dynamic Address (2759)
  • E
  • enable
  • ASRT bridge configuration command (2558)
  • DLSw configuration command (3222)
  • DVMRP configuration command (3102)
  • IP configuration command (2852)
  • IPX circuit-based filter command (3401)
  • IPX configuration command (3317), (3373)
  • IPX filter configuration command (3341)
  • LNM configuration command (2713)
  • NetBIOS filtering configuration command (2684)
  • OSPF configuration command (2958)
  • RSVP configuration command (3137)
  • TCP/IP host services configuration command (2738)
  • enable auto-refresh
  • ARP configuration command (3270)
  • enabling access control (2780)
  • exit (2537)
  • console command (2538)
  • F
  • filter-lists
  • IPX configuration command (3319)
  • IPX monitoring command (3377)
  • filter-on (2687)
  • filters
  • IPX monitoring command (3375)
  • flip
  • ASRT bridge monitoring command (2620)
  • forwarding process (2817)
  • frame command (3321)
  • frame size
  • for NetBIOS (2658)
  • functional address to group address mapping (2544)
  • G
  • getting help (2535)
  • global access control list, defining (2781)
  • H
  • hardware
  • ARP monitoring commands (3292)
  • help
  • console command (2536)
  • I
  • ICMP message type and code (2795)
  • IGMP
  • igmp
  • configuring (2862)
  • IP configuration command (2880)
  • IGP (Interior Gateway Protocol) (2914)
  • interface addresses
  • IP monitoring command (2882)
  • interface summary
  • DVMRP monitoring command (3109)
  • OSPF monitoring command (2980)
  • interface, bridge network (2762)
  • internal IP address (2765)
  • Inverse ARP
  • configuration commands (3259)
  • configuring (3253)
  • overview (3249)
  • IP (2829)
  • adding UDP Broadcast destinations (2828)
  • addresses, assigning to the bridge network interface (2764)
  • addressing network interfaces (2757)
  • ARP net routing (2776)
  • ARP subnet routing (2775)
  • autonomous systems (2915)
  • BootP/DHCP forwarding process (2814)
  • configuring (2839)
  • disabling BOOTP forwarding (2820)
  • disabling UDP Forwarding (2826)
  • dynamic routing (2767)
  • enabling BOOTP forwarding (2819)
  • enabling UDP Forwarding (2825)
  • interior gateway protocols (2913)
  • monitoring (2868)
  • OSPF and multicast routing (2923)
  • OSPF protocol (2768), (2912)
  • RIP protocol (2770), (2916)
  • RSVP protocol (3121)
  • setting the internal address (2766)
  • sizes command (2899)
  • static routing (2773)
  • IP and SNA integration
  • TN3270E Server (2822)
  • IP basic configuration procedures (2756)
  • using Dynamic Address (2758)
  • using Simple Internet Access (2837)
  • IP configuration commands
  • add (2842)
  • change (2844)
  • delete (2846)
  • disable (2848)
  • enable (2851)
  • igmp (2879)
  • list (2856)
  • move (2858)
  • set (2860)
  • summary of (2841)
  • update (2863)
  • IP filtering
  • access controls (2778)
  • description (2777)
  • route filtering without policies (2810)
  • using routing policies (2812)
  • IP monitoring commands (2883)
  • access controls (2871)
  • cache (2873)
  • counters (2875)
  • dump routing tables (2877)
  • interface addresses (2881)
  • ping (2885)
  • reset (2887)
  • RIP (2889)
  • RIP-Policy (2891)
  • route (2893)
  • static routes (2897), (2900)
  • summary of (2870)
  • traceroute (2902)
  • udp-forwarding (2904)
  • vrid (2906)
  • vrrp (2908)
  • IP multicast support
  • configuring the router (2835)
  • description (2834)
  • enrolling the router (2836)
  • IP protocol number for filtering (2789)
  • IP protocol RSVP (3128)
  • IP route filter policy configuration commands
  • add (2865)
  • IP route filtering using policies (2813)
  • IP route filtering without policies (2811)
  • IP tunnel configuration commands (2587)
  • IP tunnel feature
  • ASRT bridge (2527)
  • IPX
  • addressing (3301)
  • description (3300)
  • monitoring (3357)
  • routing
  • update interval (3302)
  • IPX circuit filters
  • configuring (3303)
  • IPX configuration commands (3320)
  • add (3310)
  • delete (3312), (3366)
  • disable (3314), (3368)
  • enable (3316), (3372)
  • filter-lists (3318)
  • list (3322)
  • move (3324)
  • set (3326)
  • summary of (3309)
  • IPX filter configuration commands
  • attach (3328)
  • create (3330)
  • default (3332)
  • delete (3334)
  • detach (3336)
  • disable (3338)
  • enable (3340)
  • list (3342)
  • move (3344)
  • set-cache (3346)
  • update (3348)
  • add (3350)
  • add (IPX) (3354)
  • add (RIP) (3352)
  • add (Router) (3351)
  • add (SAP) (3353)
  • delete (3355)
  • move (3356)
  • IPX monitoring commands
  • access controls (3360)
  • cache (3362)
  • circuit-based filter commands
  • clear (3394), (3396)
  • disable (3398)
  • enable (3400)
  • list (3402)
  • counters (3364)
  • dump routing tables (3370)
  • filter-lists (3376)
  • filters (3374)
  • ipxwan (3378)
  • list (3380)
  • ping (3382)
  • recordroute (3384)
  • reset (3386)
  • sizes (3388)
  • slist (3390)
  • summary of (3358)
  • traceroute (3392)
  • ipxwan command (3379)
  • J
  • join
  • DVMRP monitoring commands (3111)
  • OSPF configuration command (2960)
  • OSPF monitoring command (2982)
  • Tunnel configuration command (2597)
  • join group
  • DLSw configuration command (3224)
  • L
  • LAN Network Manager
  • See LNM (2699)
  • leave
  • DVMRP monitoring command (3113)
  • OSPF configuration command (2962)
  • OSPF monitoring command (2984)
  • leave group
  • DLSw configuration command (3227)
  • list (2895)
  • ARP configuration commands (3272)
  • ASRT bridge configuration command (2560)
  • ASRT bridge monitoring command (2622)
  • BAN configuration command (2586)
  • BAN monitoring command (2634)
  • DLSw configuration command (3229)
  • DVMRP configuration command (3104)
  • IP configuration command (2857)
  • IPX circuit-based filter command (3403)
  • IPX configuration command (3323)
  • IPX filtering configuration command (3343)
  • IPX monitoring command (3381)
  • LNM configuration command (2718)
  • NetBIOS filtering configuration command (2690)
  • NetBIOS filtering monitoring command (2698)
  • OSPF configuration command (2964)
  • RSVP configuration command (3138)
  • RSVP monitoring command (3142)
  • SNMP configuration command (3166)
  • SNMP monitoring command (3181)
  • TCP/IP host services configuration command (2740)
  • tunnel configuration command (2600)
  • list devices command (3257)
  • LLC device support (3192)
  • LNM
  • agents and functions (2701)
  • and LLC2 support (2703)
  • configuration commands (2708)
  • configuration restrictions (2702)
  • configuring (2704)
  • overview (2700)
  • LNM configuration commands
  • disable (2709)
  • agent port# (2711)
  • enable (2712)
  • agent port# (2714)
  • configuration (2716)
  • lnm port# (2715)
  • list (2717)
  • password (2719)
  • port port# (2720)
  • set (2725)
  • LNM monitoring commands
  • list (2721)
  • bridge (2722)
  • lnm ports (2723)
  • source (2724)
  • M
  • MAC addresses (2572)
  • MAC frames
  • CSMA/CD (2329)
  • token-ring (2331)
  • mcache
  • DVMRP monitoring command (3115)
  • OSPF monitoring command (2986)
  • memory allocation
  • for NetBIOS UI frames (2660)
  • metric, using to determine OSPF costs (2937)
  • mgroups
  • DVMRP monitoring command (3117)
  • OSPF monitoring command (2988)
  • monitoring commands
  • DLSw (2646)
  • LNM (2707)
  • NetBIOS (2647)
  • move
  • IP configuration command (2859)
  • IPX configuration command (3325)
  • IPX filter configuration commands (3345)
  • mstat
  • OSPF monitoring command (3119)
  • mstats
  • OSPF monitoring command (2990)
  • multiaccess bridge port
  • configuring (2513)
  • description (2509)
  • interoperation with 2218 (2516)
  • multiaccess database (2511)
  • multicast exploration (3191)
  • multiple spanning trees, problems with (2499)
  • N
  • name lists
  • committing changes (2639)
  • configuring (2637)
  • configuring and monitoring (2663)
  • overview (2636)
  • using (2641)
  • neighbor discovery (3190)
  • neighbor priority (3196)
  • neighbor summary
  • OSPF monitoring command (2992)
  • NetBIOS
  • ASRT bridge (2528)
  • ASRT bridge monitoring command (2628)
  • balancing traffic with SNA (3199)
  • committing name list changes (2640)
  • configuring for DLSw (2651)
  • configuring name lists (2638)
  • frame size (2657)
  • memory allocation
  • for UI frames (2659)
  • name lists overview (2635)
  • opening NetBIOS SAPS for DLSw (2653)
  • session priority (2655)
  • using name lists (2642)
  • NetBIOS commands
  • configuration commands (2661)
  • add (2664)
  • delete (2665)
  • disable (2666)
  • enable (2667)
  • list (2668)
  • set (2669)
  • monitoring
  • summary (2662)
  • NetBIOS filtering
  • basic configuration procedures (2643)
  • building a filter (2497)
  • concepts (2494)
  • prompt (2533)
  • simple and complex filters (2498)
  • using bytes (2496)
  • using host-names (2495)
  • NetBIOS filtering configuration commands
  • create (2673)
  • delete (2676)
  • disable (2679)
  • enable (2682)
  • filter-on (2685)
  • list (2688)
  • summary of (2671)
  • update (2691)
  • NetBIOS filtering monitoring commands
  • list (2696)
  • summary of (2694)
  • NetBIOS name caching
  • description (2492)
  • NetBIOS prompt (2531), (2601)
  • NetBIOS-filtering prompt (2603)
  • network circuit
  • monitoring process (3359)
  • network hardware
  • displaying ARP-registered (3293)
  • network interface
  • clearing (3287)
  • next hop gateway address selection (2801)
  • non-volatile configuration memory
  • configuring (2648)
  • O
  • open SAP
  • DLSw configuration command (3234)
  • OSPF
  • advantages over RIP (2919)
  • areas (2927)
  • AS boundary routing (2935)
  • configuration parameters (2948)
  • configuring (2911)
  • converting from RIP (2947)
  • demand circuit (2940)
  • description of (2918)
  • designated router (2921)
  • enabling (2769), (2924)
  • IP multicast routing (2922)
  • IP multicast routing, sort string (2929)
  • migrating from IBM 6611 (2949)
  • network interface parameters (2928)
  • non-broadcast network interface parameters (2931)
  • parameters for attached areas (2926)
  • poll interval (2944)
  • request hello suppression (2942)
  • RIP comparison (2939)
  • router IDs (2925)
  • routing explained (2920)
  • sort string IP multicast routing (2930)
  • virtual links (2938)
  • OSPF configuration commands
  • add (2951)
  • delete (2953)
  • disable (2955)
  • enable (2957)
  • join (2959)
  • leave (2961)
  • list (2963)
  • set (2965)
  • summary of (2950)
  • OSPF monitoring commands
  • advertisement expansion (2969)
  • area summary (2971)
  • AS-external advertisements (2973)
  • database summary (2975)
  • dump routing tables (2977)
  • interface summary (2979)
  • join (2981)
  • leave (2983)
  • mcache (2985)
  • mgroups (2987)
  • mstat (3118)
  • mstats (2989)
  • neighbor summary (2991)
  • ping (2993)
  • policy (2995)
  • routers (2999)
  • size (3001)
  • statistics (3003)
  • summary of (2968)
  • traceroute (2997)
  • weight (3005)
  • P
  • packet filter name (2807)
  • packet filters
  • defining (2782)
  • setting up access control rules (2783)
  • packet-filter (2884)
  • ping
  • BGP monitoring command (3083)
  • IP monitoring command (2886)
  • IPX monitoring command (3383)
  • OSPF monitoring command (2994)
  • TCP/IP host services monitoring command (2751)
  • policy
  • OSPF monitoring command (2996)
  • policy-based routing (2800)
  • policy-list
  • BGP monitoring command (3085)
  • poll interval (2945)
  • port map (2568), (2616)
  • precedence and TOS filtering support (2797)
  • protocol
  • RSVP (3129)
  • protocol filters
  • Ethernet Type (2546), (2554)
  • SNAP packets (2545), (2553)
  • protocols
  • Adaptive Source Routing Transparent bridge (ASRT) (2522), (2525)
  • ARP (3250)
  • ARP monitoring commands (3295)
  • displaying ARP-registered (3296)
  • DVMRP (3091)
  • inverse arp (3251)
  • IP (2840), (2867)
  • IPX (3308)
  • LAN and Internetworking
  • IPX (3307)
  • OSPF (2917)
  • OSPF (2910)
  • RIP (2772), (2854)
  • SNMP (3148), (3155), (3170)
  • TCP/IP host services (2728), (2744)
  • Q
  • QLLC
  • configuring (3210)
  • device support (3194)
  • monitoring (3239)
  • X.25 requirement for DLSw (3206)
  • QoS in RSVP (3124)
  • R
  • recordroute
  • IPX monitoring commands (3385)
  • refresh timer
  • setting (3278)
  • request hello suppression (2943)
  • reset
  • IP monitoring command (2888)
  • IPX monitoring commands (3387)
  • RSVP monitoring command (3143)
  • Resource ReSerVation Protocol (RSVP)
  • configuring and monitoring (3127)
  • RIP
  • converting to OSPF (2946)
  • enabling (2771)
  • IP monitoring command (2890)
  • OSPF routes (2936)
  • processing (2853)
  • RIP-Policy
  • IP monitoring command (2892)
  • RIP/SAP
  • disable/enable (2850)
  • RIP2 (2855)
  • route
  • IP monitoring command (2894)
  • route-table-filtering (2896)
  • router
  • displaying ARP configuration of (3274)
  • routers
  • OSPF monitoring command (3000)
  • TCP/IP host services monitoring command (2755)
  • routing
  • OSPF (2933)
  • routing between bridging and routing interfaces (2760)
  • routing tables
  • BGP dump command (3077)
  • RSVP
  • configuration commands (3132)
  • how it works (3122)
  • link types supported (3125)
  • monitoring commands (3140)
  • QoS (3123)
  • sample configuration (3126)
  • using (3120)
  • RSVP configuration commands
  • accessing (3130)
  • add (3134)
  • summary of (3131)
  • S
  • SAPS
  • opening NetBIOS SAPs for DLSw (2654)
  • save
  • SNMP monitoring command (3183)
  • SDLC
  • device support (3193)
  • security logging options (2805)
  • send
  • RSVP monitoring command (3144)
  • service access points
  • opening (2519)
  • session priority
  • for NetBIOS and DLSw (2656)
  • set
  • ARP configuration commands (3275)
  • DLSw configuration command (3236)
  • IP configuration command (2861)
  • IPX configuration command (3327)
  • LNM configuration command (2726)
  • OSPF configuration command (2966)
  • RSVP configuration command (3139)
  • SNMP configuration command (3168)
  • TCP/IP host services configuration command (2742)
  • set-cache
  • IPX filter configuration command (3347)
  • show
  • RSVP configuration command (3145)
  • Simple Internet Access (2838)
  • size
  • OSPF monitoring command (3002)
  • sizes
  • IPX monitoring command (3389)
  • slist
  • IPX monitoring command (3391)
  • SNA
  • balancing traffic with NetBIOS (3198)
  • DLSw (3187)
  • SNMP
  • authentication scheme (3151)
  • community (3150)
  • configuring (3147), (3154)
  • MIB support (3152)
  • monitoring (3169)
  • overview (3149)
  • trap messages (3153)
  • SNMP configuration commands
  • add (3157)
  • delete (3159)
  • disable (3161), (3163)
  • list (3165)
  • set (3167)
  • summary of (3156)
  • SNMP monitoring commands
  • add (3172)
  • delete (3174)
  • disable (3176), (3178)
  • list (3180)
  • save (3182)
  • statistics (3184)
  • summary of (3171)
  • source address verification (2809)
  • Source Routing
  • terminology and concepts
  • all routes broadcast (2449)
  • all stations broadcast (2451)
  • bridge (2453)
  • bridge number (2455)
  • explorer frames (2457)
  • ring number (2459)
  • route (2461)
  • route designator (2463)
  • route discovery (2465)
  • segment number (2467)
  • single route broadcasting (2469)
  • source routing bridging (2471)
  • spanning tree (2473)
  • transparent bridging (2475)
  • threading (2502)
  • Source Routing bridge
  • description of (2397)
  • frame types (2402), (2406)
  • operation of (2400)
  • Routing Information Field (2403)
  • spanning tree explorer frame (2404)
  • terminology and concepts (2447)
  • bridge instance (2414)
  • bridge number (2416)
  • explorer frames (2418)
  • interface number (2420)
  • route (2422)
  • route discovery (2424)
  • segment number (2426)
  • source routing (2428)
  • Source Routing Transparent bridge
  • architecture (2432)
  • description of (2429)
  • general description (2430)
  • operation of (2431)
  • terminology (2433)
  • explorer frames (2434)
  • routing information field (RIF) (2435)
  • routing information indicator (RII) (2436)
  • source routing (2437)
  • spanning tree (2438)
  • transparent bridging (2439)
  • Spanning Tree bridge (2341)
  • explore option (2407)
  • Spanning tree network
  • balancing traffic loads (2411)
  • simulation of (2409)
  • spanning tree protocol
  • with 8209 bridges (2500)
  • split-horizon routing
  • for AppleTalk (3304)
  • static routes
  • IP monitoring command (2898), (2901)
  • static routing
  • interaction between static routing and dynamic routing (2774)
  • statistics
  • ARP monitoring commands (3298)
  • OSPF monitoring command (3004)
  • SNMP monitoring command (3185)
  • stop-rsvp
  • RSVP monitoring command (3146)
  • SysLog facility option (2803)
  • T
  • Talk
  • OPCON command (2869), (2967), (3256), (3281)
  • TCP
  • interoperability considerations with DLSw (3408)
  • TCP connection establishment (SYN) filtering (2793)
  • TCP connections (3189)
  • TCP/IP host services
  • basic configuration procedures (2729)
  • configuring (2727)
  • monitoring (2743)
  • TCP/IP host services configuration commands
  • add (2731)
  • delete (2733)
  • disable (2735)
  • enable (2737)
  • list (2739)
  • set (2741)
  • summary of (2730)
  • TCP/IP host services monitoring commands
  • dump (2746)
  • interface (2748)
  • ping (2750)
  • routers (2754)
  • summary of (2745)
  • traceroute (2752)
  • TCP/UDP source and destination port numbers (2791)
  • test (2670)
  • threading
  • AppleTalk end stations (2506)
  • IP end-stations (2503)
  • IPX end stations (2505)
  • timer
  • refresh (3279)
  • TN3270E Server (2823)
  • TOS filtering support (2798)
  • traceroute
  • BGP monitoring command (3089)
  • IP monitoring command (2903)
  • IPX monitoring commands (3393)
  • OSPF monitoring command (2998)
  • TCP/IP host services monitoring command (2753)
  • translation cache
  • clearing (3286)
  • displaying (3290)
  • Transparent bridge (STB)
  • bridge ID (2345)
  • description of (2335)
  • Ethernet packet format translation (2352)
  • network requirements (2340)
  • on 10/100 Ethernet (2353)
  • operation of (2343)
  • port ID (2346)
  • root bridge ID (2344)
  • routers and bridges (2337)
  • shaping the spanning tree (2348)
  • spanning tree bridges (2351)
  • terminology and concepts (2355)
  • aging time (2357)
  • bridge (2359)
  • bridge address (2361)
  • bridge hello time (2363)
  • bridge identifier (2365)
  • bridge maximum age (2367)
  • bridge priority (2369)
  • designated bridge (2371)
  • designated port (2373)
  • filtering and permanent databases (2375)
  • parallel bridges (2377)
  • path cost (2379)
  • port (2381)
  • port ID (2383)
  • port number (2385)
  • port priority (2387)
  • resolution (2389)
  • root bridge (2391)
  • root port (2393)
  • spanning tree (2395)
  • tunnel
  • ASRT bridge configuration command (2574)
  • tunnel configuration commands
  • add (2589)
  • delete (2592)
  • join (2595)
  • list (2598)
  • tunnel feature
  • prompt (2529)
  • tunneling
  • bridge tunnel (2398)
  • type (2786)
  • U
  • UDP destination
  • adding (2827)
  • UDP forwarding
  • enabling/disabling (2824)
  • udp-forwarding
  • IP monitoring command (2905)
  • update
  • IP configuration command (2864)
  • IPX filter configuration commands (3349)
  • NetBIOS filtering configuration command (2693)
  • V
  • Virtual Router Redundancy Protocol, configuring (2831)
  • vrid
  • IP monitoring command (2907)
  • vrrp
  • IP monitoring command (2909)
  • W
  • weight
  • OSPF monitoring command (3006)

  • [ Top of Page | Previous Page | Table of Contents | Index ]